SolarPath all-in-two solar lights separate the photovoltaic (PV) panel from the LED head, giving site engineers the flexibility to tilt the panel toward optimal solar irradiance while aiming the light where the project needs it. This split configuration suits tall poles, shaded roadways, high-lumen applications, and sites with variable peak sun hours (PSH). All-in-two fixtures deliver up to 50,000 lumens with IP66 ingress protection and up to seven days of autonomy across most climates.
The panel mounts on an adjustable bracket that tilts to the site’s optimal solar angle (typically latitude plus 10 to 15 degrees). A 50W to 120W LED array pairs with a 100Ah to 200Ah LiFePO4 battery and a 150W to 300W PV panel. CCT is selectable at 3000K, 4000K, or 5700K with CRI above 70. UL and Dark Sky listings cover the full product family.
All-in-two fixtures are the flagship choice for high-performance deployments where all-in-one lumen output or autonomy is insufficient. Learn more about our product catalog, roadway applications, and parking lot deployments.
The PV panel mounts on an adjustable bracket separate from the LED head. Site engineers tilt the panel to match the site latitude plus 10 to 15 degrees, which maximizes annual solar capture. The LED head aims independently to meet photometric targets on the driven or walked surface.
Tall poles of 25 to 40 feet suit all-in-two fixtures because the heavier split-panel configuration distributes weight and wind load across a larger mounting bracket. Roadway and arterial corridors use this configuration with Type II or Type III distribution.
Shaded sites, variable PSH zones, and high-latitude installations benefit from independent panel aiming. A panel tilted correctly can recover 20 to 30 percent more annual solar energy than a horizontal or shallow-tilt configuration.
Specification | Value |
LED Wattage | 50 to 120 W |
Lumen Output | Up to 50,000 lm |
Efficacy | 200 lm/W maintained |
Battery Type | Lithium Iron Phosphate (LiFePO4) |
Battery Capacity | 960 to 1,920 Wh |
Solar Panel | Monocrystalline, 150 to 300 W (split, tilt adjustable) |
IP Rating | IP66 |
CCT | 3000K / 4000K / 5700K selectable |
CRI | 70+ standard, 80+ optional |
Mounting | Split bracket, adjustable tilt panel + independent LED head |
Pole Height Compatibility | 20 to 40 ft |
Autonomy | 4 nights standard, up to 7 |
Operating Temperature | -40 F to 158 F |
Weight | 30 to 55 kg |
Warranty | Product-specific |
Certifications | UL, FCC, RoHS |
Independent panel bracket maximizes solar capture at site latitude plus 10 to 15 degrees for 20-30 percent more annual energy.
Up to 50,000 lumens per fixture delivers lux targets on roadways, parking lots, and sports fields without multiple pole runs.
Split-panel design distributes weight and wind load across large brackets, supporting 25 to 40 foot pole heights.
Adjustable aiming recovers energy on sites where a horizontal fixed panel would lose 30 percent or more of annual capture.
The all-in-two family is SolarPath’s performance platform. When a site requires high lumen output, tall poles, variable PSH compensation, or challenging aiming requirements, this configuration delivers results that integrated fixtures cannot match. Every specification ships with a stamped photometric study, a panel tilt calculation, and a commissioning report.
Browse our full product catalog and compare with our integrated all-in-one family for lower-lumen applications.
All-in-one fixtures integrate the PV panel, battery, controller, and LED head into a single housing for fast install and lower cost. All-in-two fixtures separate the panel from the LED head for independent tilt adjustment, higher lumen output, and tall pole compatibility. Choose all-in-two for roadways, high-lux parking lots, and shaded sites.
The panel mounts on an adjustable bracket that tilts from 0 to 45 degrees. Optimal tilt equals site latitude plus 10 to 15 degrees for maximum annual energy capture. SolarPath provides the tilt calculation with every project quote.
Up to 50,000 lumens depending on LED wattage. 50W fixtures deliver up to 10,000 lm, 80W up to 16,000 lm, and 120W up to 24,000 lm at 200 lm/W. Higher-output configurations reach up to 50,000 lumens.
Yes. All-in-two is the standard configuration for SolarPath roadway deployments. Type II and Type III distribution, 25 to 40 foot pole heights, and 8,000 to 12,000 lumen output meet state DOT roadway specifications.
Battery capacity is customized to each project as needed. Autonomy of up to seven nights is available for sites in lower-PSH regions or climates with extended cloud cover.
Yes. Every SolarPath all-in-two SKU ships UL and Dark Sky listed, meeting utility rebate programs and federal, state, and municipal procurement specifications nationwide.
Request a free solar lighting audit and discover how off-grid lighting can reduce your operating costs to zero.
Or call 201-490-4499
