SolarPath solar wall pack lights mount directly on building facades, loading dock walls, stairwell exteriors, and perimeter walls. The compact integrated housing holds the PV panel, lithium iron phosphate (LiFePO4) battery, MPPT charge controller, and LED array in a single fixture that bolts to concrete, brick, or steel construction without any conduit run or utility hookup. Output reaches up to 3,450 lumens with IP65 ingress protection.
Wall pack applications cover building perimeters, back-of-house service areas, loading docks, stairwell exteriors, emergency exits, and parking garage facades. The forward-throw optical design projects light outward and downward across the wall’s face, providing security and wayfinding illumination without creating light trespass onto adjacent properties. Optional PIR motion sensors extend autonomy on security-duty installations.
Every wall pack ships UL and Dark Sky listed, carries a product-specific warranty, and installs in up to 30 minutes per fixture using standard wall anchors. Browse our catalog, security perimeter applications, and state-level specifications.
The wall pack housing integrates the PV panel at the top, the LED array at the bottom, and the LiFePO4 battery plus MPPT controller in the middle. Fixture depth is 6 to 10 inches from the wall face, and standard mounting hardware fits concrete, brick, and steel construction.
building perimeters and loading docks use wall packs as the standard exterior fixture. Forward-throw optics project light outward 15 to 30 feet at usable security lux levels. One fixture per bay or service door is the typical specification.
Stairwell exteriors, emergency exits, and egress routes require reliable illumination during grid outages. Solar wall packs deliver this independently of the building’s electrical system, which continues to operate through power failures and utility disruptions.
Optional PIR motion sensors with 15 to 30 foot detection range extend autonomy on security-duty wall packs. The two-stage dimming profile holds 20 percent ambient output through low-activity hours and delivers full burst on detection.
Up to 3,450 lumens, IP65, up to 7 day autonomy, compact wall-mount design, 6 to 10 inch depth, and optional PIR motion sensor.
Specification | Value |
LED Wattage | 20 to 60 W |
Lumen Output | 2,000 to 6,000 lm |
Efficacy | 140 to 170 lm/W |
Battery Type | Lithium Iron Phosphate (LiFePO4) |
Battery Capacity | 240 to 720 Wh |
Solar Panel | Monocrystalline, 40 to 120 W (integrated top) |
IP Rating | IP65 |
CCT | 4000K / 5700K selectable |
CRI | 70+ |
Beam Distribution | Forward-throw, 60 to 90 degrees |
Mounting | Wall-mount, concrete/brick/steel compatible |
Fixture Depth | 6 to 10 in from wall face |
Motion Sensor | Optional PIR, 15 to 30 ft range |
Autonomy | 3 to 4 nights |
Operating Temperature | -30 F to 158 F |
Warranty | Product-specific |
Certifications | UL, FCC |
PV panel, battery, controller, and LED in one wall-mount housing. No conduit, no utility hookup, no field wiring.
60 to 90 degree forward distribution projects light 15 to 30 feet outward for building perimeter and dock coverage.
Under two hours per fixture with standard wall anchors. Replaces aging grid-tied wall packs without permits.
Continues operation through power failures and utility disruptions, critical for emergency egress and stairwell lighting.
Wall packs are the workhorse fixture of building perimeter lighting. SolarPath wall packs bring the same UL and Dark Sky listed, warranty-backed platform that powers our street lights into a compact wall-mount form factor. Retrofit installation avoids the conduit runs and utility coordination that grid-tied wall pack replacements require.
Browse our catalog and security perimeter applications.
Standard wall anchors bolt the fixture to concrete, brick, or steel construction. Installation takes up to 30 minutes per fixture. No conduit run, no utility coordination, no electrical permit required in most jurisdictions.
Up to 3,450 lumens, covering close-range perimeter, egress, and loading dock applications.
Yes. Retrofit installation removes the old fixture and disconnects the existing conduit. The new SolarPath wall pack installs on the same mounting footprint using the original anchor points. The old conduit and wiring are capped or removed.
Yes. Because the fixture runs entirely on its own PV panel and LiFePO4 battery, it operates independently of the building's electrical system. This is a critical capability for emergency egress, stairwell, and exit lighting.
5700K daylight is the most common for security and industrial applications. 4000K neutral suits retail and hospitality building exteriors where warmer rendering is preferred. CCT is selectable on every SolarPath wall pack SKU.
Yes. PIR motion sensors with 15 to 30 foot detection range are available as an option. Two-stage dimming (20 percent ambient, full burst on detection) extends effective autonomy on security-duty deployments.
Each product ships with its own specific warranty covering the PV panel, LiFePO4 battery, MPPT controller, and LED array. Extended warranty options are available for real estate portfolio retrofit contracts.
Request a free solar lighting audit and discover how off-grid lighting can reduce your operating costs to zero.
Or call 201-490-4499
