Wyoming averages 4.6 to 5.4 peak sun hours (PSH) per day, with high-altitude clarity giving the state a stronger resource than its latitude suggests. Annual solar irradiance reaches roughly 1,800 kWh per square meter across much of the state. SolarPath Sun Solutions deploys solar lighting across energy-sector facilities, WYDOT corridor sites, ranch operations, and park-gateway towns.
Every fixture ships UL and Dark Sky listed, pairs a lithium iron phosphate (LiFePO4) battery with an MPPT charge controller, and carries an IP65 or IP66 ingress protection rating. Rocky Mountain Power serves most of the state alongside rural cooperatives covering its vast open country. BABA and BAA compliance documentation is available on a project-by-project basis.
SolarPath solar lighting across Wyoming. We cover Cheyenne, Casper, Laramie, Gillette, Rock Springs, and Jackson. Corridors along I-80, I-25, and I-90 use WYDOT-ready fixtures with LiFePO4 batteries sized for extreme wind and high-plains winters and 4.6 to 5.4 peak sun hours.
SolarPath Sun Solutions deploys solar lighting across Solar Lighting Solutions in Wyoming with a single-source platform for products, photometric design, and installation. Every project runs on UL and Dark Sky listed hardware, pairs a lithium iron phosphate (LiFePO4) battery with an MPPT charge controller, and delivers three to seven days of autonomy based on the site’s peak sun hours (PSH). Browse our product families and application categories below to match the right fixture to your Solar Lighting Solutions in Wyoming project.
Solar Street and Area Lights form the core of most SolarPath deployments in Solar Lighting Solutions in Wyoming. Our all-in-one and all-in-two fixtures deliver 3000 to 12000 lumens with Type II and Type III photometric distribution, 3000K or 4000K CCT, and four-day autonomy on a single charge. Every fixture ships with an IP65 or IP66 ingress protection rating and a product-specific warranty covering the photovoltaic panel, LiFePO4 battery, MPPT controller, and LED array.
Parking Lot and Roadway Lighting targets 1 to 3 footcandles average maintained at uniformity ratios below 4:1. Solar Lighting Solutions in Wyoming projects typically use all-in-two fixtures at 20 to 30 foot pole heights, eliminating trenching, conduit, and utility hookup. Roadway applications meet IES RP-8 standards with Type II and Type III distribution tuned to the corridor geometry.
Park, Pathway, and Bollard Lighting combines dark-sky compliance with pedestrian-scale illumination. SolarPath bollards and decorative LEDs deliver 400 to 1200 lumens with full-cutoff optics, 3000K warm CCT, and CRI 80+ for color-accurate wayfinding on Solar Lighting Solutions in Wyoming civic and campus sites. Every fixture meets International Dark-Sky Association (IDA) ordinances.
Security and Perimeter Lighting protects Solar Lighting Solutions in Wyoming storage yards, industrial sites, and municipal facilities with motion-triggered flood lights and wall packs. PIR sensors, two-stage dimming, and 4000 to 8000 lumen bursts extend autonomy during low-activity hours while delivering instant full output when movement is detected.
Sports Field and Recreation Lighting handles Solar Lighting Solutions in Wyoming athletic facilities, school playfields, and community recreation sites. High-output all-in-two fixtures deliver 10000 to 20000 lumens per head, pair with pole heights of 30 to 50 feet, and run on scheduled timers that match league and practice hours.
Specialty and Decorative Lighting covers Solar Lighting Solutions in Wyoming monument lighting, canopy fixtures, traffic signals, solar charging poles, and custom-CCT decorative LEDs. Every specialty product runs on the same LiFePO4 and MPPT platform as our standard catalog, so project managers retain one warranty, one point of contact, and one accountable partner across mixed-fixture specifications.
SolarPath Sun Solutions ships and supports solar lighting projects across the United States. Our engineering and logistics teams handle every deployment from coastal Florida to the Colorado Rockies, with region-specific peak sun hours modeling and compliance support baked into every quote.
SolarPath solar lighting deployments across California — from Los Angeles parking facilities to Bay Area municipal projects. Our California team coordinates UL and Dark Sky listed equipment with CEC-compliant installations.
Texas solar lighting projects spanning Houston, Dallas, Austin, and San Antonio. High peak sun hours make Texas ideal for off-grid parking lot, roadway, and industrial site deployments.
Florida solar lighting installations engineered for Category-5 wind loads and salt-air environments. Miami-Dade NOA certified mounting for hurricane-zone parking, pathway, and municipal lighting projects.
New York solar lighting serving NYC boroughs, Long Island, and upstate municipalities. LiFePO4 battery systems sized for northern-latitude winter autonomy and DEC dark-sky compliance.
Wyoming averages 4.6 to 5.4 PSH per day, with high-altitude clarity giving the state a stronger resource than its latitude suggests. SolarPath sizes each PV array and battery bank to the site's exact PSH profile before procurement.
Every Wyoming specification is engineered for extreme wind and high-plains winters: IP66-sealed housings, surge-protected MPPT electronics, and LiFePO4 batteries rated from -40 F to +158 F. Five-day autonomy carries fixtures through extended poor-charging stretches.
UL and Dark Sky listed SolarPath fixtures may qualify for commercial lighting incentives. Rocky Mountain Power serves most of the state alongside rural cooperatives covering its vast open country. Documentation for rebate applications is provided on procurement.
Yes. Our fixture platforms are engineered to Wyoming Department of Transportation (WYDOT) roadway lighting requirements. We supply stamped photometric studies, pole loading calculations, and compliance documentation with every corridor project.
Common deployments include energy-sector facilities, WYDOT corridor sites, ranch operations, and park-gateway towns. No-trenching installation keeps sites undisturbed and projects off the utility coordination queue.
Wyoming sites typically ship with five-day autonomy for high-plains winters and ground-blizzard cycles. Final sizing follows the site-specific photometric and PSH study included with every project.
Request a free solar lighting audit and discover how off-grid lighting can reduce your operating costs to zero.
Or call 201-490-4499
